|
Post by moparsteve on Oct 11, 2017 11:15:37 GMT 12
Am wanting to use seats from a 1998/2006 C10 which have the seat belts included in the seat. But on those belts although they are web clamp inertia I have been told do not lock if you tug the belt with vehicle stationary. Plenty of these in use in imported trucks but will they be able to be certified in a modified vehicle. Steve
|
|
|
Post by Todd on Oct 12, 2017 8:03:32 GMT 12
Hi Steve,
Yes, single sensitive belts such as this may be used. Just make sure to keep in mind that stressed seats (seats with the belts attached), have specific requirements around how they are mounted to the vehicle.
Cheers
Todd
|
|
|
Post by moparsteve on Oct 13, 2017 18:40:04 GMT 12
Thanks for that Todd
I've read up in the manual and will verify construction of the frame design with my certifier
Steve
|
|
|
Post by Todd on Oct 16, 2017 8:53:24 GMT 12
Sounds good.
Good luck with the build.
|
|