dman
Tyre kicker
Posts: 4
|
Post by dman on Mar 24, 2018 18:32:47 GMT 12
hi there, I'm trying to understand stand the requirements for custom pedal boxes. I'm wanting to customize my pedal box and turn it into a reverse mount box with remote master cylinders. I need to extend my pedals to mount the master cylinder connection. Can I weld an extra piece on to lengthen or do I need to cut a new one-piece pedal so there is no welding. the red line is where the standard one ends and I want to extend it.
|
|
|
Post by Todd on Mar 26, 2018 10:18:20 GMT 12
Hi there,
The pedal must be one piece. The pedal pad can be welded on, but not an extension.
|
|