nickn
Tyre kicker
Posts: 1
|
Post by nickn on May 29, 2015 21:46:52 GMT 12
I'm wanting to shorten my ute tray and chassis. Currently there is about 300m of chassis rail behind the rear leaf spring shackle mounts. There is a structural cross member forward of the shackle mounts but nothing rearward.
Can I cut the chassis back to level with the end of the schackle mount? And if so will this require cert or will it pass a standard wof?
My thinking is the regidity will not be reduced and with the tray being shortened there will be less weight and force over all on the chassis.
i hope this makes sense
nick
|
|
|
Post by Leon on Jun 2, 2015 8:02:26 GMT 12
Hi Nick,
Yes, any chassis alterations like this will need to be certified.
|
|