Post by jayncee on Oct 12, 2011 21:29:50 GMT 12
Hi Justin
I am in the process of adding Wilwood Calipers and Discs to the Jag rear I'm putting into my Hot Rod build.
The discs are the kind that have no centre and need to be bolted to a hub. Not too dissimilar to the ones on this web page www.wilwood.com/Rotors/RotorList1.aspx?mktname=Ultralite%20HP%2030%20Vane%20Rotor
I am going to have a centre carrier laser cut from 10mm steel plate, so this should be strong enough.
My question is though can I have this item chrome plated?
I will also need to make caliper mounts, these will also be cut from 10mm steel. Can these be chromed too?
Cheers
Colin
I am in the process of adding Wilwood Calipers and Discs to the Jag rear I'm putting into my Hot Rod build.
The discs are the kind that have no centre and need to be bolted to a hub. Not too dissimilar to the ones on this web page www.wilwood.com/Rotors/RotorList1.aspx?mktname=Ultralite%20HP%2030%20Vane%20Rotor
I am going to have a centre carrier laser cut from 10mm steel plate, so this should be strong enough.
My question is though can I have this item chrome plated?
I will also need to make caliper mounts, these will also be cut from 10mm steel. Can these be chromed too?
Cheers
Colin
