muzza
Tyre kicker
Posts: 2
|
Post by muzza on Nov 15, 2011 13:20:47 GMT 12
Fitting retractable belts to a 69 nissan gloria, can I cut a pocket @ bottom of b pillar to insert unit into piller & weld mount bracket for same as bottom factory mount is in inner sill which leaves retractor exposed beside front seat .original mounts are only for lap belts in front seats.I have weld top plate to pillar as per diagram 14.12
|
|
|
Post by Dan on Dec 9, 2011 12:48:53 GMT 12
Yes you can do this, as long as the original strength is reinstated. As the upper anchorage is now in the B-pillar you should ensure the base of the pillar is strong enough to cope with that load too.
Dan
|
|