|
Post by cheese on Feb 23, 2012 12:20:18 GMT 12
I want to fit a pair of crush tubes into my 910 bluebird so i can fit the more modern crossmembers from s13 or r23 etc do i need to weld the crush tube in place? or can i just tack it on, it should be strong with everything bolted together. cheers for your time mike.
|
|
|
Post by Justin on Feb 27, 2012 10:29:10 GMT 12
Hi Mike
The crush tube must be fully welded to the face of the chassis rail or crossmember opposite to that which the component is positioned against.
The HCTM also details some additional requirements relating to crush tubes, and also provides a diagram to assist.
I hope this helps
Cheers, Justin
|
|