|
Post by nzjailbar on Apr 3, 2012 20:11:38 GMT 12
Is a hoop required for the front of the rear driveshaft .
|
|
|
Post by Justin on Apr 12, 2012 10:15:23 GMT 12
Hi nzjailbar
Yes - an effective 360 degree drive-shaft safety loop must be fitted to each section of drive-shaft.
This is covered in the sidebar of the Hobby Car Technical Manual, 5.22.2;
Where a vehicle is required by these rules to have a drive-shaft safety-loop, and the vehicle has a two-piece drive-shaft, a drive-shaft safety loop must be fitted to each drive-shaft section.
Cheers, Justin
|
|