|
|
Post by 32guy on Apr 4, 2012 19:23:17 GMT 12
If i get Pedal arms laser cut from 10mm am i allowed to grind and linish them to a more oval shape?
Thanks
|
|
|
|
Post by Justin on Apr 12, 2012 9:46:12 GMT 12
Hi 32guy
Yes you can - radiusing the corners is quite common - provided you don't reduce the overall material thickness of the pedal below the minimum specification (8mm), or below a safe tolerance of the 10mm material being used. In other words, if due to the length of the pedal 10mm material was needed to provide a suitably rigid pedal, then reducing the material to 8mm would not be suitable.
I hope this helps
Justin
|
|
|
|
Post by 32guy on Apr 17, 2012 16:01:46 GMT 12
Cheers-Thanks for that.
|
|
