|
Post by jimbo121 on Jul 30, 2012 15:46:38 GMT 12
G,day. From my understanding in the manual, sch 80 pipe is ok to use for steering links and radius rods, ladder bars etc.... Is there any advantage to using mechanical or DOM tube? Thanks.
|
|
|
Post by Justin on Aug 20, 2012 11:20:50 GMT 12
Hi there
Schedule 80 is specified as it will allow for the tapping of an internal thread directly into the arm, meaning no additional welding is required.
|
|
|
Post by jimbo121 on Sept 9, 2012 20:40:01 GMT 12
OK thanks for clearing that up.
|
|