|
Post by antonio on Jul 25, 2013 0:27:28 GMT 12
Reading the Hobby Manual it mentions that Socketless fuel hose is appropriate, I assume that means it doesn't also need to be clamped by a hose clip or tie? By using Socketless that would be used with the correct push on fittings, and not attaching to a hard pipe where a clamp is required.
|
|
|
Post by Rob on Mar 24, 2014 7:54:08 GMT 12
Hi Antonio
Section 10.7.4 of the Hobby Car Manual states - A push-on join between a flexible fuel hose and a rigid fuel pipe or fitting on a low volume vehicle must be secured with a suitable hose-clamp or clip to prevent unintended disconnection due to fuel delivery pressure or vehicle vibration.
Regards
Rob
|
|