|
Post by jaguar1 on Sept 16, 2020 18:04:41 GMT 12
Hi i have a CF Bedford with a new diff which drive shaft doesn't fit the flange can I mill a 25 mm ali ring to fit drilling on one side and different drilling on the other side which will give it 8 bolts instead of 4.I have the room for the clearance need for g/box as putting different motor in cheers
|
|
|
Post by Chris on Sept 17, 2020 7:58:22 GMT 12
Hi i have a CF Bedford with a new diff which drive shaft doesn't fit the flange can I mill a 25 mm ali ring to fit drilling on one side and different drilling on the other side which will give it 8 bolts instead of 4.I have the room for the clearance need for g/box as putting different motor in cheers Hi Jaguar It will be far simpler to modify the driveshaft to have the correct drive flange on it. Any decent driveshaft specialist should be able to do this. Cheers Chris
|
|