|
Post by slimjim on Oct 1, 2020 20:07:08 GMT 12
Hi all,
Just wondering if machining drums (or discs with integrated bearings) down for a hub is an ok practice?
Many thanks in advance Slim
|
|
|
Post by Chris on Oct 2, 2020 7:02:56 GMT 12
Hi all, Just wondering if machining drums (or discs with integrated bearings) down for a hub is an ok practice? Many thanks in advance Slim Hi Slim That would be considered a custom hub, so would require TAC approval. Cheers Chris
|
|