|
Post by duke01 on Apr 7, 2021 8:47:26 GMT 12
I am looking at replacing the rear end in my car, I am planning on a complete diff and drive shaft from Strange engineering in USA. I am also considering having it built to accommodate offset spring hangers with a mono leaf spring but still using the original mount points which have factory torque boxes. What are the requirements with the offset and mono springs and requirements for a direct replacement set up. Thanks, Gary. I will be using the factory brakes.
|
|
|
Post by Chris on Apr 12, 2021 9:41:06 GMT 12
I am looking at replacing the rear end in my car, I am planning on a complete diff and drive shaft from Strange engineering in USA. I am also considering having it built to accommodate offset spring hangers with a mono leaf spring but still using the original mount points which have factory torque boxes. What are the requirements with the offset and mono springs and requirements for a direct replacement set up. Thanks, Gary. I will be using the factory brakes. Hi Gary If you are looking for requirements, I would start in the suspension standard - lvvta.org.nz/documents/standards/LVVTA_STD_Suspension_Systems.pdfYou can also download the suspension chapter of the CCM for free from here - www.lvvta.org.nz/shop/chapter-6-suspension-systems/Regards Chris
|
|