|
|
Post by halfcutratrods on Apr 19, 2021 20:40:33 GMT 12
Hi what is the requirements for welding a chassis qualification wise? Is the ICAR mig standard ok or is there a seperate test that needs to be done for welding chassis
|
|
|
|
Post by Chris on Apr 20, 2021 8:29:23 GMT 12
Hi what is the requirements for welding a chassis qualification wise? Is the ICAR mig standard ok or is there a seperate test that needs to be done for welding chassis You can download the Attachment Systems Chapter of the CCM here - www.lvvta.org.nz/shop/chapter-18-attachment-systems/ - General, chassis and critical function welding requirements start at the bottom of page 7. One of the benefits of the LVVTA system is builders can carry out their own chassis and other non-critical component welding even if they are not formally qualified, providing that the builder meets the requirements of a practical test applied by an LVV Certifier. This test has been developed specifically to enable competent people to carry out their own structural welding if they so desire. Hopefully that will help. Cheers Chris |
|
