|
Post by markymark on Jun 8, 2023 11:29:18 GMT 12
Hi can you confirm you can attach seat belt reel and end to same fixing using doubler 80x50 plates
|
|
|
Post by Chris on Jun 9, 2023 7:47:06 GMT 12
Hi can you confirm you can attach seat belt reel and end to same fixing using doubler 80x50 plates Hi Markymark It is acceptable for a retro-fitted and LVV certified lower outer seatbelt and retractor reel to share the same anchorage provided that the minimum doubler plate assembly surface area is 3000 square mm, with not less than 30 mm in width. This is possible because the applied loads upon the retractor and lower anchorage, in the event of a crash, are not the in same direction. Hope that helps. Chris
|
|
|
Post by markymark on Jun 9, 2023 12:17:27 GMT 12
Thanks Chris, Certifier has told me it can’t be done.
|
|